Rapid one-step synthesis, characterization and functionalization of silica coated gold nanoparticles

This paper describes a rapid, simple and one-step method for preparing silica coated gold (Au@SiO₂) nanoparticles with fine tunable silica shell thickness and surface functionalization of the prepared particles with different groups. Monodispersed Au nanoparticles with a mean particle size of 16 nm were prepared by citrate reduction method. Silica coating was carried out by mixing the as prepared Au solution, tetraethoxysilane (TEOS) and ammonia followed by microwave (MW) irradiation. Although there are several ways of coating Au nanoparticles with silica in the literature, each of these needs pre-coating step as well as long reaction duration. The present method is especially useful for giving the opportunity to cover the colloidal Au particles with uniform silica shell within very short time and forgoes the use of a silane coupling agent or pre-coating step before silica coating. Au@SiO₂ nanoparticles with wide range of silica shell thickness (5-105 nm) were prepared within 5 min of MW irradiation by changing the concentration of TEOS only. The size uniformity and monodispersity were found to be better compared to the particles prepared by conventional methods, which were confirmed by dynamic light scattering and transmission electron microscopic techniques. The prepared Au@SiO₂ nanoparticles were further functionalized with amino, carboxylate, alkyl groups to facilitate the rapid translation of the nanoparticles to a wide range of end applications. The functional groups were identified by XPS, and zeta potential measurements.     

4-卤代苯甲酸铽配合物荧光性能的研究

以4-氯苯甲酸(4-ClBA)、4-溴苯甲酸(4-BrBA)和4-碘苯甲酸(4-IBA)为配体合成了三种4-卤代苯甲酸铽的稀土配合物Tb(4-ClBA)3,Tb(4-BrBA)3和Tb(4-IBA)3,紫外可见光吸收光谱表明,相同摩尔浓度的Tb(4-IBA)3的紫外吸收最强,Tb(4-BrBA)3的紫外吸收强度次之,Tb(4-ClBA)3的紫外吸收最弱,而荧光发射光谱表明,Tb(4-IBA)3和Tb(4-BrBA)3的荧光发射强度远小于Tb(4-ClBA)3的.从配体的结构及配体能级、稀土离子Tb3+能级、配体到稀土离子之间的能量传递等角度对该试验结果进行了分析探讨,结果表明苯甲酸对位的碘原子、溴原子和氯原子与苯环上的碳原子所形成的碳卤键热振动的不同是造成三种稀土配合物荧光强度差别较大的本质原因.     

基于微流控芯片的色谱系统的研究进展及其应用

近年来,基于微流控芯片的色谱技术研究取得了快速发展。本文对微流控芯片上色谱柱的加工方法、泵阀驱动控制装置的设计、集成及联用色谱系统的研制及其应用等方面予以综述,涉及文献66篇。     

一种混合价态钌配合物的合成、晶体结构和电化学性质

[Ru6(μ-O2CCH3)12(CH3OH)2(HCOO)2][Ru2(μ-O2CCH3)4(H2O)2](PF6)2.2H2O(Ru2(Ⅱ,Ⅲ)混合价)是通过二步反应合成的。首先Ru2(O2CCH3)4Cl在加热条件下与甲醇反应得到红棕色中间物,然后将该中间物在甲醇水(体积比7∶1)溶液中用Ag2SO4和NH4PF6进行脱氯配位反应得到此化合物。用元素分析、红外光谱、热重分析、循环伏安、X-衍射单晶结构分析等对其进行了表征。晶体结构表明,标题化合物的晶体属单斜晶系,空间群为P21/n,晶胞参数:a=0.85362(14)nm,b=1.19589(19)nm,c=3.6642(6)nm,β=92.316(3)°,Z=2,每个结构基元包含2个不同的配离子,其中[Ru2(μ-O2CCH3)4(H2O)2]+是1个双核钌配离子,[Ru6(μ-O2CCH3)12(CH3OH)2(HCOO)2]+是由另1个由甲醇配位、甲酸根桥连的六核钌配离子。2个独立的结构单元通过氢键形成三维超分子网络结构。采用循环伏安法对其电化学性质进行了表征,结果为一对准可逆的氧化还原峰,表明该配合物的中心金属二价钌原子Ru(Ⅱ)与三价钌原子Ru(Ⅲ)之间存在电子转移。     

Light-Driven Crawling of Molecular Crystals by Phase-Dependent Transient Elastic Lattice Deformation

The light-driven crawling of a molecular crystal that can form three phases, (α, β, and γ) is presented. Laser irradiation of the molecular crystal can generate phase-dependent transient elastic lattice deformation. The resulting elastic lattice deformation that follows scanning irradiation of a laser can actuate the different phases of molecular crystal to move with different velocity and direction. Because the γ phase has a large Young's modulus (ca. 26 GPa), a force of 0.1 μN can be generated under one laser spot. The generated force is sufficient to actuate the γ-formed molecular crystals in a wide dimensional range to move longitudinally at a velocity of about 60 μm min⁻¹, which is two orders of magnitude faster than the α and β phases.     

Enhanced photocatalytic activity of Ni doped TiO2 nanowire–nanoparticle hetero–structured films prepared by hydrothermal and sol–gel methods

TiO₂ nanowire-nanoparticle hetero-structured films were prepared via a sol–gel method and coated on glass substrates by dipping method for photocatalytic activity. In this study 0, 1, 3, and 5 mol% of Ni doped were studied. One-dimensional TiO₂ nanowires (NWs) were prepared by hydrothermal treatment with TiO₂ nanoparticles (NPs) which are commercially available. XRD, FESEM, DRS, and XPS were used to characterize the prepared nanowire-nanoparticle hetero-structures films. 3%Ni doped TiO₂ hetero-structured film (TNi3) had the highest photocatalytic activity on the degradation of methylene blue (MB). TNi3 films provided about 4.3 times of degradation rate compared to undoped TiO₂ (T). It revealed that TNi3 film resulted in shifting the absorption wavelength towards narrowing the energy band gap and small crystallite size. Therefore, the TNi3 film exhibited a photocatalytic activity on the degradation of MB under visible light irradiation greater than undoped film.     

Evolution of Cu(In,Ga)Se2 surfaces under water immersion monitored by X-ray photoelectron spectroscopy

Cu(In,Ga)Se₂ absorbers were immerged in deionized water for different times, and specific chemical evolutions were monitored thanks to X-ray photoemission spectroscopy. Cu(In,Ga)Se₂ related dissolution products were studied in water through induced coupled plasma optical emission spectroscopy. From those analyses, specific surface network disorganization was observed, with Cu migration towards the surface, leading to different kinetics of oxidation and dissolution for each element that could be quantified.     

Measurement of viscoelastic properties for polymers by nanoindentation

A new method has been proposed and verified to measure the viscoelastic properties of polymers by nanoindentation tests. With the mechanical response of load–displacement curves at different loading rates, the parameters of creep compliance and relaxation modulus are calculated through the viscoelastic contact model. Dynamic thermomechanical analysis (DMA) tests are conducted to compare the results by the proposed technique. The results show that the correlation coefficients between DMA tests and the new method are above 0.9 in the entire range, which verified the feasibility of the method. The loading curves fitted by the model are identical to the experimental curves within the discrete points and so it shows that this technique is more suitable for general linear viscoelastic materials. Numerical creep tests are carried out to examine the effectiveness of the proposed method by input the Prony series calculated by the three-element Maxwell model and the viscoelastic contact model. The good agreement shows that the proposed technique can be applied in practice.     

碳化终温对β-Mo2C催化喹啉加氢脱氮性能影响

以MoO_3为前驱物,CH_4/H_2为碳源,采用程序升温直接还原碳化法制备不同碳化终温(640、660、680、700和720℃)的碳化钼催化剂,通过XRD、N_2吸附-脱附、SEM、TEM、XPS和Raman表征研究碳化钼的物理性质和结构性质,并研究不同碳化终温碳化钼对喹啉加氢脱氮的催化性能。结果表明,不同碳化终温的碳化钼催化剂均为β-Mo_2C,碳化终温可显著改变碳化钼表面物种含量、平均孔径和介孔分布。碳化终温为680℃时,催化剂碳化程度较高,表面氧物种含量最低,表面C/Mo物质的量比最高,对应的催化活性也最佳,在340℃、4 MPa条件下,喹啉的转化率和脱氮率均高达99%以上,芳香族类化合物的选择性可达37.8%,显示出较低的芳环破坏性。表面组成尤其是表面氧对于β-Mo_2C上喹啉加氢脱氮反应途径的调控至关重要。